00:12
How to installing Microprocessor On Motherboard Step by step
The microprocessor and the motherboard are dependent on each other .Before installing the microprocessor , you must check that the motherboard and the microprocessor are compatible with each other .
To install the Core i3 Processor in the LGA 1156-ZIF socket.
❶ Check the voltage requirement from the motherboard and the microprocessor documentation
❷Place the motherboard on the work desk
❸ Take the microprocessor out from the plastic case by holding the microprocessor at the edges.
❹ Locate the socket where the microprocessor must be installed
❺ Raise the lever
❻ Raise the flap and remove the plastic protective cover from the processor socket
❼ Align notch on the microprocessor with the alignment notch on the motherboard
❽ Gently,place the microprocessor in the socket
❾ press the microprocessor firmly in the socket keeping in mind that no damage is cause to the pins.
❿ Put the flap first then push the lever back down such that it is parallel to the motherboard and lockets in place ,taking care not to break the lever while lowering it
Thank You :)
The microprocessor and the motherboard are dependent on each other .Before installing the microprocessor , you must check that the motherboard and the microprocessor are compatible with each other .
To install the Core i3 Processor in the LGA 1156-ZIF socket.
❶ Check the voltage requirement from the motherboard and the microprocessor documentation
❷Place the motherboard on the work desk
❸ Take the microprocessor out from the plastic case by holding the microprocessor at the edges.
❹ Locate the socket where the microprocessor must be installed
 |
| Socket for installing the Microprocessor |
❺ Raise the lever
 | |
| Raised Lever |
❻ Raise the flap and remove the plastic protective cover from the processor socket
 |
| Removing Plastic Protective Cover from Socket |
❼ Align notch on the microprocessor with the alignment notch on the motherboard
 |
| Aligning the Microprocessor |
❽ Gently,place the microprocessor in the socket
❾ press the microprocessor firmly in the socket keeping in mind that no damage is cause to the pins.
❿ Put the flap first then push the lever back down such that it is parallel to the motherboard and lockets in place ,taking care not to break the lever while lowering it
 |
| Locking the Lever to install the Microprocessor |
Thank You :)
I really appreciate this post. I’ve been looking all over for this! Thank goodness I found it on Bing. You’ve made my day! Thanks again! “One never goes so far as when one doesn’t know where one is going.
ReplyDeleteT1 Installation Services